How to Turn Off the Flame Alarm on Your Ortur Laser Master 2 Pro

Are you tired of constantly being interrupted by your Ortur Laser Master 2 Pro's flame alarm? You're not alone. Many owners of this popular laser engraver have experienced the frustration of the alarm going off even when there isn't any fire.

The fire alarm on the Ortur Laser Master 2 (OLM2P, LM2P, or LM2 Pro) is known to be very sensitive, causing it to easily trigger and disrupt your work. Fortunately, there is a simple solution to this problem. In this article, we'll explain how to shut off the flame alarm on your Ortur Laser Master 2 Pro. The key to turning off the alarm lies in LightBurn Command $261=0. By entering this command, you can disable the flame detector and stop the alarm from going off. Many users have found this to be an effective way to deal with the pesky alarm.

With this simple workaround, you can easily solve the problem. To use this command, you'll need to connect your Ortur Laser Master 2 Pro to your computer. Then, open the console in Lightburn and enter the command command $261=0, you can quickly and easily shut off the alarm and get back to your laser engraving and cutting projects. This will turn off the alarm and allow you to continue your work without any interruptions. While the fire alarm may seem like a minor issue, it is actually super annoying because of how sensitive it is, constantly screaming when there is no fire.

In conclusion, the fire alarm on the Ortur Laser Master 2 Pro can be easily turned off by using LightBurn Command $261=0. Now, you can say goodbye to those constant interruptions and focus on creating your designs with ease. Don't let a sensitive alarm hold you back from enjoying your laser engraver to its full potential. Give this solution a try and see the difference it makes in your work.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.