Height Adjusting Bricks For King Gubby Stackable Brick Feet | Height Adjustment Bricks Only

These are the 2x4 stacking bricks that are needed for the King Gubby Stackable Brick Feet. They work with all of our Brick Feet Products (See List Below). Adds 3/4 of an inch to your laser with every set.

Roughly 7 Bricks (per foot) needed for Ortur tumbler accessory. This is for a standard (not oversized) tumbler.

Sold as individual bricks

THIS DOES NOT COME WITH THE NECCESSARY ATTACHMENT BRACKETS FOR YOUR SPECIFIC LASER, THOSE CAN BE FOUND HERE  👇

Ortur Laser Master 2 Brick Feet
Ortur Laser Master 2 Pro Brick Feet
Neje Max & Plus
Aufero Laser 2
FoxAlien Reizer
Atomstack X7
Atomstack A5

Each Brick is ~19mm (3/4 inch) high

1. Are the King Gubby Stackable Brick Feet compatible with all building bricks?
   No, they work with DUPLO Legos or any similar sized, off-brand bricks. However, it is best to check the specifications of the bricks before purchasing to ensure compatibility.

2. Can I use the Ortur Laser Master 3 Stackable Brick Feet without bricks?
   Yes, by using the feet without any bricks, you will still have the sturdiest retaining feet on the market for your Laser Master 3.

3. How many bricks do I need for the Ortur Laser Master 3 Stackable Brick Feet by King Gubby?
   The number of bricks required for the Stackable Brick Feet depends on the height you want to achieve. It is recommended to purchase a few extra bricks in case you need to make adjustments in the future. Each brick is 3/4 of an inch high (19mm). 19mm divided by the height of the object you are trying to get under your laser, when focused, will give you the number of bricks you need.

4. How many bricks do I need for the King Gubby Brick Feet to use the rotary accessory?
   King Gubby recommends eight bricks per foot or thirty two bricks total to raise your laser high enough for engraving tumblers. Keep in mind, this is a general estimate, as there are different types and sizes of tumblers on the market, and they all require different heights. Please refer to question three to get your exact measurement needs.

AGAIN, THIS LISTING IS ONLY FOR THE 2X4 STANDARD BRICKS, NOT THE PIECES NEEDED TO ANCHOR YOUR LASER TO THEM. 

*These are brand new bricks, but due to the bulk purchasing that we do, they may have scuffs and scrapes on them.