The Aufero Laser 2 Z Axis Adjuster. This Z Height Adjuster easily and quickly adjusts the height of your laser's module. Gives you 40mm of Z travel for quick and easy focus. Adding the Bit Drive and Knob Upgrade really takes any hassle out of adjusting too.
Works with Aufero Laser 2 and Ortur Laser Master 2 Pro Model - Not The Standard Model
YOU MAY NEED TO ADJUST YOU ENDSTOP and we recommend moving it!
Uses 4mm allen wrench to adjust, includes Tool Holder and T-Handle wrench
Install: -Entirely disassemble the z axis adjuster, if it came assembled -Remove the dovetail pieces from both your carriage and module -Replace those pieces with the printed counterparts and slide it together on the machine -Insert barrel nut and drop M5 bolt through hole in the top of the carriage plate -Attach the bolt lock clip over the bolt head and start adjusting
Get the Bit Drive & Knob Upgrade to make fine tuning your focus extra simple.
Originally from the design (I Have permission and pay royalties) By PLAY3Rone977 https://www.thingiverse.com/thing:4607685 Remixed by paulmacdermot https://www.thingiverse.com/thing:4627986 The T-Handle wrench is designed by Kezat https://www.thingiverse.com/thing:951909
