Skip to product information
1 of 7

King Gubby

Ortur Laser Master 2 Bottom Mount Air Assist (For LU2-4 12V & 24V and LF Modules)

Ortur Laser Master 2 Bottom Mount Air Assist (For LU2-4 12V & 24V and LF Modules)

Regular price $15.99
Regular price Sale price $15.99
Sale Sold out
Add On
Simple and slim. This air assist takes up almost no real estate on your module. It conveniently attaches to the already existing threaded holes in the bottom of your Ortur module's heat sink. This works with the LU2-4 (12V & 24V) and the LF (if you want to replace the stock Air Assist) modules.
You can also attach our Endoscope attachment and use them simultaneously
Ortur Laser Master 2 (Standard & Pro Models) Endoscope Attachment | Co – King Gubby

Get deeper cuts by removing the debris with our air assist. Cleaner engravings and overall better performance. If you have shop air, we recommend between 15-25psi. Small pumps will show great improvements as well. Checks the links below if you still need a pump.

You can find all of our air pump options here:
Tools Required:
2mm allen wrench

-Fasten both attachment brackets to the module's threaded holes with the provided M3 screws
-arrange and fasten in all of your adjustable links, hose mount, and air nozzle
-Install your 6mm hose (sold separately)
-Guide hose up to the stepper area
-Secure hose with zip ties to the wire loom
-Place Nozzle at 45 Degrees 2-3mm from laser dot on workpiece.

**Ortur Laser Master 2 Pro (LU2-4 [12V & 24V]) only. This will not fit the regular LM2 modules as they do not have the holes on the bottom. If you are looking for an air assist for the regular LM2 model, please see our other listing.


*The laser and hose shown is for illustrative purposes only and is not part of the offer.
**The laser module in the above images may differ from the pro model but is used for illustrative purposes
View full details